TP-Link 300Mbps Wifi N Access Point / Range Extender / Client TL-WA801ND

The Multi-Talent from TP-Link - makes your wired network devices Wifi enabled:

• Client Mode allows ordinary wired network devices to connect to a Wifi network
  e.g. connect your DVR / XVR / ZVR / NVR to your wifi router via wifi
• Access Point Mode transforms a wired network to Wifi
• Repeater Mode extens your existing Wifi range

300Mbps high speed with two seperate antennas for transmitting (tx) and receiving (rx)

The Multi-Talent from TP-Link - makes your wired network devices Wifi enabled:

• Client Mode allows ordinary wired network devices to connect to a Wifi network
• Access Point Mode transforms a wired network to Wifi
• Repeater Mode extens your existing Wifi range

• 300Mbps wireless speed ideal for smooth HD video, voice streaming and online gaming
• Supports multiple operation modes: Access Point, Multi-SSID, Client, Universal/WDS Repeater, Bridge with AP
• Easily setup a WPA encrypted secure connection at a push of the WPS button
• Up to 30 meters (100 feet) of flexible deployment with included Passive Power over Ethernet Injector

What This Product Does

The TP-LINK Wireless N Access Point TL-WA801ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The APs support a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.

 

Wireless N - Speed & Range

Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

 

Multiple Operating Modes
- Easy to Build WLAN

Supports multiple operation modes (Access Point, Multi-SSID, Client, Universal/ WDS Repeater, Bridge with AP) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone.

 

Passive PoE Supported
- More Flexible Deployment

The TL-WA801ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

HARDWARE FEATURES Interface One 10/100M Ethernet Port(RJ45)
Support Passive PoE Button Power On/Off Button
WPS Button
Reset Button External Power Supply 9VDC / 0.6A Wireless Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b Dimensions ( W x D x H ) 7.1 ×4.9× 1.4 in. (181 ×125 ×36mm) Antenna Type 2*5dBi Detachable Omni Directional (RP-SMA) WIRELESS FEATURES Frequency 2.4-2.4835GHz Signal Rate 11n: Up to 300Mbps(dynamic)
11g: Up to 54Mbps(dynamic)
11b: Up to 11Mbps(dynamic) Reception Sensitivity 270M: -68dBm@10% PER
130M: -68dBm@10% PER
108M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER Transmit Power <20dBm(EIRP) Wireless Modes AP Mode
Multi-SSID Mode
Client Mode
Repeater Mode (WDS/Universal)
Bridge with AP Mode Wireless Functions Enable/Disable Wireless Radio
WDS Bridge
MAC Address Filter Wireless Security 64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK Quality of Service WMM Management SNMP Advanced Functions Up to 30 meters Passive PoE is supported OTHERS Certification CE, FCC, RoHS Package Contents Wireless Access Point TL-WA801ND
2 Detachable Omni directional antennas
Power supply unit
Passive PoE Power Injector
Resource CD
Quick Installation Guide
RJ-45 Ethernet Cable System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7,
MAC OS, NetWare, UNIX or Linux. Environment Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing