Pair of video baluns for HDCVI/HDTVI/AHD/CVBS over UTP Cat5 Cat6 unshielded twisted pair up to 5MPix

• Pair of passive video baluns / transceivers for HD video
• Transfer HD video signal (HDCVI / HDTVI / AHD) as well as analogue CVBS via UTP (unshielded twisted pair), Cat5 / 5e, Cat6 / 6e cables
• Up to 400m (437yd) transmission distance
• Up to 5MPix Resolution
• 1 Channel

 

 

Passive video balun (transceiver) for UTP unshielded twisted pair cables / Cat5 / Cat5e / Cat6. 2 units for transmission and reception, specific for analogue high definition (HD) video.

Maximum resolution: up to 5 Mega Pixel

Optimised for transmission of HDCVI, HDTVI and AHD video signals, but can also be used for analogue CVBS signals.
Both, transmitter and receiver have a BNC connector and two-pin connector terminals with fixing knobs (no screw driver required).

Maximum transmission distance depends on HD standard and cable quality used:

720p: 250m (207yd)
1080p: 250m (207yd)
4MPx: 200m (218yd)
5MPx: 200m (218yd)

720p: 400m (437yd)
1080p: 250m (273yd)
4MPx: 200m (218yd)
5MPx: 200m (218yd)

720p: 350m (382yd)
1080p: 200m (218yd)
4MPx: 200m (218yd)
5MPx: 200m (218yd)

400m (437yd)

 

 

 

 

Transmission distances are approximate

 

Features

• 1 channel passive transciever HDCVI, HDTVI and AHD
• HDCVI range: 400 meters (720p), 250 meters (1080p), 200m (4MPix, 5MPix)
• HDTVI range: 250 meters (720p, 1080p), 200m (4MPix, 5MPix)
• AHD range: 350 meters (720p), 200 meters (1080p, 4MPix, 5MPix)
• CVBS analogue range: 400 meters
• Power supply not required
• Interference rejection / Crosstalk (>60dB)
• Built-in voltage stabilizer and transient protection
• CAT5/5E/6/6E cable
• Working temperature: -10ºC ~ +55ºC
• Dimensions:
  DVR RX: 37.5 x 19 x 15 mm plus approx. 140mm cable incl. BNC plug
  Camera TX: 55 x 19 x 15mm incl. BNC plug
• Easy connection with push pins
• Input Impedance: 75 Ohm
• Output Impedance: 100 Ohm
• Combatible with all HDCVI / HDTVI / AHD analogue HD cameras and DVRs

Transmission distances are approximate